ABEIXI™
备件
| N4101500 | T-Clip Adapter for 50 mm Transmission-Reflectance Sphere |
| 09903906 | Purge Gas Connectors – 0.125 in, Female |
| B0045862 | Halogen-Lamp 12V, 50W |
| N5191662 | Split Ferrule |
| N9308337 | Crackle Test Reference Standard, 0 wt% H2O |
| N9304204 | Arsenic (As) TruQms Standard, 1 µg/mL, 2% HCl, 125 mL |
| L1003009 | Viton O-Rings for TD, Pkg. 5 |
| N6101034 | Purge Restrictor for Capillary Injector |
| N3133023 | Pressure Seal for High Pressure 100 mL, 100 Bar Digestion Vessels |
| N9304293 | Antimony (Sb) TruQ Standard, 10,000 µg/mL, H2O/Tartaric Acid/Tr HNO3, 125 mL |
| N9304275 | Thallium (TI) TruQms Standard, 1 µg/mL, 2% HNO3, 125 mL |
| N9308266 | Blank for Diesel Fuel – 75 cSt Hydrocarbon Oil, 100 mL |
| 09902151 | O Ring – Silicone, 0.070 in |
| 09903891 | Stainless Steel Zero Vol. Ferrule, 1/16 |
| 09902133 | Mixing Chamber O-Ring – Viton, 3.487 ID |
| B7001014 | Pierced Aluminum Covers – Qty. 400 |
| N9303948 | PerkinElmer Pure XVII, 15% HCl trace HF, 125 mL |
| N3050870 | Intensitron Coded Adapter for AAnalyst – Selenium (Se) |
| B0094139 | Sample Container for MHS-10 |
| N9300030 | 1/4″ Brass Rear Ferrule, Pkg. 5 |
| 02401028 | Glass Tube Nut – 11 mm, Qty. 1 |
| 09200273 | O-ring(2) for Metal Body Nebulizer for P |
| N0777843 | Copper Tape for D-Torch qty. 12 |
| N9300031 | 1/4″ Brass Front Ferrule, Pkg. 5 |
| N9304254 | Selenium (Se) TruQms Standard, 1 µg/mL, 5% HNO3, 125 mL |
| B0045095 | O-Ring for corrosion-resistant nebulizer |
| N0790131 | 1-Slot Demountable Quartz Torch for Avio 200/500 |
| N8152429 | Demountable Platinum Injector – 2.0 mm I.D., Gray |
| 03030448 | AA and ICP Vent and Blower Kit – 230V |
| M0410316 | Trap Heat Conduction Bushing with Ceramic Washer |
| N9302923 | 1/16″ x 0.02″ I.D. Tubing, 125 cm |
| N9303762 | Carbon (C) TruQ Standard, 1,000 µg/mL, H2O, 125 mL |
| N9308540 | Viscosity PTP Test Standard |
| 00473194 | Small Nebulizer Gasket |
| N6400108 | GC 2400 Column Hanger |
| L1201944 | Powder Press for Premium HATR Accessory |
| N0777669 | 2.5 mL Sample Loop, 0.8 mm ID, connect to ports #1 and #4 |
| 02401296 | Single Quill Brush – Qty. 12 |
| N9303348 | 20 mL Clear Glass Crimp Top Vial with Write-On Patch, 1000/pk |
| N9300061 | Swagelok Stainless Steel Plug, 0.125 in |
| 02401294 | Spanner Wrench for the Normally Open and Normally Closed Valves |
| L1003021 | Tefzel Ferrule – 1/8 Inch, Qty. 5 |
| N5376622 | Hangdown Wire Alignment Tool |
| N2411117 | Glass Tube Nut – 25 mm, Qty. 1 |
| N9308209 | Chromium (Cr) Standard, 1000 µg/g, in Hydrocarbon Oil, 50 g |
| N2411333 | Copper Diffusion Plug |
| N9300054 | Swagelok Brass Nuts – 0.25 in, Pkg. 5 |
| L1191081 | Flowcell Window – ZnSe, OilExpress, Qty. 2 |
| N9303797 | Interference Check Standards, 5% H2O/trace HNO3/0.6% Tartaric Acid, 500 mL |
| N9302922 | 50 cm Tubing 1/16 OD x .02 ID |
| 09907233 | Open End Wrench, 1/4″ – 5/16″ |
| N9306025 | 20µL Stainless Steel Sample Loop for Model 7725 RheodyneInjectors |
| 09903120 | Swagelok PTFE Back Ferrule, 0.25 in |
| N6701053 | TurboMatrix HS Heather Non-Trap Washer |
| N9331050 | Internal Standard for Method 524.2 |
| 00860248 | NFT-26 O-Rings, Pkg. 8 |
| N0830013 | S20 Series Organics Consumables Kit |
| N5320117 | O-Ring - Viton, 0.799 ID, Qty. 1 |
| N5361180 | Diamond DSC Sample Loading Tool |
| N2916085 | Hi-Flow Drain Cup for LC 300/Flexar Pumps and Detectors |
| N6100159 | Split Vent Line for Capillary Injector |
| N9302836 | Valco Stainless Steel Ferrule – 0.125 in Nut x 0.125 in I.D. |
| L1272323 | Flat Tip for High Pressure Clamp |
| N5191009 | DSC 7 Dry Box Replacement Iris – Qty. 8 |
| N9304236 | Iron (Fe) TruQms Standard, 1 µg/mL, 2% HCl, 125 mL |
| WE021137 | Nickel Skimmer Cone for ELAN 9000/6×00/DRCs |
| 09912223 | Replacement FID Nozzle Ring |
| B0506722 | Graphite Tip for Fume Extractor |
| N0777700 | 50 mL Graduated Conical Bottom PerformR Tubes with Teal Plug Caps Included, Qty. 500 – Freestanding |
| N9303769 | Erbium (Er) TruQ Standard, 1,000 µg/mL, 2% HNO3, 125 mL |
| 09920183 | Stainless Steel Male Nuts – 0.0625 in, Pkg. 5 |
| N9304238 | Lanthanum (La) TruQms Standard, 1 µg/mL, 2% HNO3, 125 mL |
| N6100161 | ECD Vent Tube Assembly |
| N6411400 | Small Injector Adapter for HS and GC 2400 |
| N6101380 | 5 μL On-column Syringe Metal Plunger 0.47 mm OD Needle |
| N2916059 | PEEK Tubing – Red, 50 cm x 0.0625 in O.D. x 0.005 in I.D. |
| L1601629 | Standard Sample Area Baseplate for the Spectrum Two (Unprogrammed) |
| N9331041 | Internal Standard for Method 8260B |
| B0199476 | Insulating Bush |
| N0770609 | Torch Module Support Stand |
| N0831031 | Peripump Tubing ID Pharmx 3.2MM |
| N9300048 | Swagelok Brass Union – 0.0625 in I.D., Pkg. 2 |
| N0811953 | Carbon Fiber Sample Probe, Red Band, 0.8 mm I.D. |
| N9308390 | Polysulfide Oil Blank in 13 cSt Mineral Oil – 0 μg/g, 500 mL |
| 09904849 | Plastic Pump Priming Syringe, 30 mL |
| B3001505 | Sample Tray Cover for AS-800/900 Furnace Autosampler |
| N9308338 | Crackle Test Reference Standard, 0.1 wt% H2O |
| 09210635 | Viton-PTFE Coated O-Ring, 2.56 mm I.D., for Avio 200/500 |
| N0791182 | Alumina Injector, 1.2 mm I.D. – Entire Length of Tube, for Avio |
| N9305076 | 2 mL Amber Glass 11 mm Crimp Top PureView™ Vial with Write-On Spot and Fill Lines – MS Certified, 100/pk |
| 09920516 | PEEK Finger-tight Tubing Nut for GemClean Nebulizer |
| 09920517 | Finger-tight Tubing Nut for GemClean Nebulizer |
| N0371492 | Capillary Adjust Nut for GemTip Nebulizers |
| L1200445 | Window Blank Accessory |
| N5330311 | Full Nut Set, hexagon, varied sizes, DMA 8000 |
| N2411144 | Combustion Tube Wrench – 25 mm |
| 09903464 | Stainless Steel Hex Nut for 1/4 in. Swagelok Tube Fitting |
| N5202088 | Spirit Level STA 6000/8000 Furnance |
| L1003013 | O-Rings for ATD 400 – 5.23 mm I.D., Pkg. 5 |
| L1202023 | UATR Sample Position Plate – 3 mm |